Juniper Support 10G SFP+ LR Transceiver Module 1310nm 10km Duplex LC Connector
Juniper 100% Support 10G LR 1310nm 10km SFP+ Optical Transceiver
Product Features
● Supports up to 11.3Gb/s bit rates
● Duplex LC connector
● Hot pluggable SFP+ footprint
● Uncooled 1310nm DFB transmitter, PIN photo-detector
● Applicable for 10km SMF connection
● Low power consumption, < 1W
● Digital Diagnostic Monitor Interface
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Electrical interface compliant to SFF-8431
● Operating case temperature:
Commerical:0 to 70 °C Industrial:-40 to 85 °C
Applications
● 10GBASE-LR/LW at 10.3125Gbps
● 10G Fiber Channel
● Other optical links
Product Descriptions
Olinkcom’ OLSP311XL-C(I)D10 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 20km over SingleMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication.
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter |
Symbol |
Min. |
Typ |
Max. |
Unit |
Note |
| Transmitter |
| Operating Wavelength |
λ |
1290 |
1310 |
1330 |
nm |
|
| Ave. output power (Enabled) |
PAVE |
-3 |
|
+5 |
dBm |
1 |
| Side-Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
| Extinction Ratio |
ER |
4 |
|
|
dB |
|
| RMS spectral width |
Δλ |
|
|
1 |
nm |
|
| Rise/Fall time (20%~80%) |
Tr/Tf |
|
|
50 |
ps |
|
| Dispersion penalty |
TDP |
|
|
2 |
dB |
|
| Relative Intensity Noise |
RIN |
|
|
-128 |
dB/Hz |
|
| Output Optical Eye |
Compliant with IEEE 0802.3ae |
| Receiver |
| Operating Wavelength |
|
1260 |
|
1600 |
nm |
|
| Receiver Sensitivity |
PSEN1 |
|
|
14.4 |
dBm |
2 |
| Overload |
PAVE |
|
|
0.5 |
dBm |
|
| LOS Assert |
Pa |
-30 |
|
|
dBm |
|
| LOS De-assert |
Pd |
|
|
-16 |
dBm |
|
| LOS Hysteresis |
Pd-Pa |
0.5 |
|
|
dB |
|
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 231-1 with worst ER=4.5@ 10.3125Gb/s.
Quality Warranty:3 years
Biside compatible 100% Juniper,this item is no problem to 100% be connected with Cisco,Ciena,FS,D-link,MikroTik etc switches.
Product Tags:
|
|
Juniper Support 10G SFP+ LR Transceiver Module 1310nm 10km Duplex LC Connector Images
|
